- Excellent material insulation ring, can timely cut off the phenomenon of magnetic adhesion
- direct acting type but more pressure resist level
- Compact construction, almost imperceptible response speed
- Bottom mounting hole for easy installation
- Can be used outdoors for a long time
- The sealing ring is easy to replace
- working pressure range in 0-2.0 Mpa (0 -290 Psi)
2WH series 2/2 ways a small high-pressure brass solenoid valve. The body size is compact and the optional pressure range is between 20 bar, and 30 bar is available. The product also has an optical LED indicator to show the working state. Optional high-temperature sealing parts can withstand the maximum pressure of 120-150℃. The M3 mounting hole at the bottom of the valve makes it easy to install the solenoid valve on any plane. Waterproof connectors or energy-saving modules can be installed according to different equipment requirements and the working environment. If the working temperature is too high, you can choose the iron coil shell, improve the heat dissipation capacity of the coil, and prolong the service life of the product.

Product Parameters
Category | 2/2 ways |
Way of action | direct acting |
Series | 2WH |
Body Material | Brass |
Way to control | solenoid valve |
Pressure resistance | 0 - 2.0Mpa |
Sealing material | NBR,VITON,EPDM |
Temperature | -5 ~ 80 ℃ (120℃ optional) |
Caliber range | 1/8"-3/8" |
Normally open normally closed | N.C. |
Wiring | DIN connector |